Omega Rustblock Heavy Duty Metal Primer is a high performance, anti-corrosive metal primer. Rustblock Heavy Duty Metal Primer forms a tough, flexible anti-corrosive coating to resist corrosion, even in the harshest of environments. Rustblock Heavy Duty Metal Primer provides outstanding rust protection and is an excellent base for Rustblock Epoxy Gloss Enamel and other quality Omega top coat finishes.
Areas of application:
Exterior and Interior applications. Ideal for use on zincalume® and galvanised Iron, for priming steel, wrought iron and structural steel
For use on roofs, wrought iron railings, gutters, down pipes and general structural steel work.
Method of Application
Can be applied by brush, roller or spray. Please use the method best suited to your requirement and skill.
Surface Preparation
Remove all surface rust, loose and flaking / peeling paint and sand back coating edges. Ensure surface is clean, dry and free from dust, grease, oil and all other surface contamination.
Apply Omega Rustblock Rust Converter to rusted surfaces.
Prepare and coat section by section to achieve best results
Surface isto be coated immediately after preparation.
Note: Cooler temperature, higher film thickness, or higher humidity conditions will lead to longer drying times Do not apply when surface temperature is below 100C or above 350 C
Application Stir contents thoroughly using a flat stirrer before and during use. Apply one coat evenly by brush, roller or spray, after proper surface preparation. Avoid over-brushing and rolling. For brush or roller application do not use more than 3% with Omega Enamel Thinner. If spraying, thin up to 10% with Omega Enamel Thinner. Allow Rustblock Heavy Duty Metal Primer to dry for at least 8 hours before application of finishing product. Note: For best results, prepare, prime and finish section by section to avoid prolonged exposure to the elements.
