Enviro 200P Ultra is an ultra-flexible, class III waterproofing membrane specifically designed for internal use under tiles and for a range of water tank applications. Enviro 200P Ultra is formulated on a water-based crosslinked copolymer system that is urethane modified.
Typical Uses Enviro 200P Ultra is used for the waterproofing of walls, floors, decks and roof areas that will be covered with a wearing surface, such as tiles or other appropriate protective coatings. Enviro 200P Ultra can also be used as a tank liner in permanent immersion situations.
Internal Wet Areas
Bathrooms, Kitchens, Laundries
Fire Sprinkler Tanks
Greywater Tanks
Stormwater Retention Tanks
Suitable Substrates Enviro 200P Ultra is suitable for use over the following substrates:
New concrete - cured for min. 28 days under 4.5% moisture (gravimetric method)
Fibre Cement Sheets - Walls (min. 6mm)
Renders and Screeds - Cured for min. 7 days
Compressed Fibre Cement (min. 15mm)
Plasterboard walls - Wet area grade only(min. 10mm)
