Duram Primeseal MC (‘Moisture Cure’) is a high performance, versatile, two-part, water based, hydrostatic pressure resistant, epoxy waterproofing barrier membrane coating suitable for most types of porous and semi-porous surfaces including green (newly laid) hardened concrete and damp surfaces. Primeseal MC’s versatility makes it also ideal as a primer for waterproofing membranes, paints, industrial coatings and as a bridging coating for normally incompatible coatings.
Uses
Primeseal MC is suitable for potable (drinking water) applications and can withstand up to 25 meter head of water pressure.
Waterproofs and seals damp and green (newly laid) hardened concrete.
Waterproofs negative (inside) and positive (outside) surfaces.
Waterproofs basements, retaining walls, lift wells, cellars etc.
Waterproofs tanks and water retaining structures.
Excellent primer for subsequent Duram membranes, paints and industrial coatings.
A primer and sealer of concrete, cement, cement render, timber, brick, block work, FC sheeting, CFC sheeting and plasterboard.
A primer over bituminous and torch-on membranes so that they can be top-coated or re-membraned.
An intercoat bridging coating to allow the application of incompatible coatings.
Features & Benefits
Can be applied to green (newly laid) hardened concrete.
Is a barrier against low water vapour pressure.
Suitable for contact with potable (drinking) water. Conforms to AS4020-2000.
Withstands up to 25 meter head of water.
Applied in sensitive areas.
Quick drying.
Has excellent adhesion.
Used as a primary waterproof barrier on rigid surfaces.
It will not re – emulsify.
Seals over most existing coatings.
Used to seal both the negative and the positive sides of the substrate.
Compatible with all Duram waterproofing membranes and floor coatings.
Acts as a bleed sealer over bituminous surfaces, including over traditional torch-on waterproofing products.
